Research Database
Displaying 101 - 120 of 127
Climate change tipping points: A point of no return?
Year: 2013
Summer 2012 saw records fall for intensity of drought and number, size, and cost of wildfires in the Central and Western United States, and the climate forecast calls for more of the same in the near and distant future. When wildfire breaks out, emergency responders decide their immediate strategy based on past experience and quick judgment calls. But in the long term, land managers need to plan for a warmer climate on a time scale of decades, or even a century or more, to better reflect the life span of trees and forests. Studies supported by the Joint Fire Science Program (JFSP) are…
Publication Type: Report
Living in a tinderbox: wildfire risk perceptions and mitigating behaviors
Year: 2013
The loss of homes to wildfires is an important issue in the USA and other countries. Yet many homeowners living in fire-prone areas do not undertake mitigating actions, such as clearing vegetation, to decrease the risk of losing their home. To better understand the complexity of wildfire risk-mitigation decisions and the role of perceived risk, we conducted a survey of homeowners in a fire-prone area of the front range of the Rocky Mountains in Colorado. We examine the relationship between perceived wildfire risk ratings and risk-mitigating behaviours in two ways. First, we model wildfire…
Publication Type: Journal Article
Mapping multiple forest threats in the northwestern United States
Year: 2013
US forestlands are increasingly subject to disturbances including wildfire, insects and disease, and urban and exurban development. Devising strategies for addressing these “forest threats“ depends on anticipating where individual disturbances are most likely and where they might occur in combination. However, many spatial data sets describing forest threats are produced at fine scales but are intended only for coarse-scale planning and policy purposes. We demonstrate one way to combine and display forest threat data at their appropriate spatial scales, using spatial data characterizing…
Publication Type: Journal Article
Capturing Fire: RxCadre Takes Fire Measurements to a Whole New Level
Year: 2013
Models of fire behavior and effects do not always make accurate predictions, and there is not enough systematically gathered data to validate them. To help advance fire behavior and fire effects model development, the Joint Fire Science Program is helping fund the RxCADRE, which is made up of scientists from the U.S. Forest Service and several universities who orchestrate and collect data on prescribed burns in the southeastern United States. The RxCADRE-prescribed burns are yielding a comprehensive dataset of fire behavior, fire effects, and smoke chemistry and dynamics, with measurements…
Publication Type: Report
Social Science at the WUI: A Compendium of Research Results to Create Fire-Adapted Communities
Year: 2013
Over the past decade, a growing body of research has been conducted on the human dimensions of wildland fire. Building on a relatively small number of foundational studies, this research now addresses a wide range of topics including mitigation activities on private lands, fuels reduction treatments on public land, community impacts and resident behaviors during fire, acceptance of approaches to postfire restoration and recovery, and fire management policy and decisionmaking. As this research has matured, there has been a recognition of the need to examine the full body of resulting…
Publication Type: Report
Wildfire, Wildlands, and People: Understanding and preparing for wildfire in the wildland-urban interface
Year: 2013
Fire has historically played a fundamental ecological role in many of America’s wildland areas. However, the rising number of homes in the wildland-urban interface (WUI), associated impacts on lives and property from wildfire, and escalating costs of wildfire management have led to an urgent need for communities to become "fire-adapted." We present maps of the conterminous United States that illustrate historical natural fire regimes, the wildland-urban interface, and the number and location of structures burned since 1999. We outline a sampler of actions, programs, and community planning and…
Publication Type: Report
Overcoming barriers to firewise actions by residents
Year: 2013
Encouraging the public to take action (e.g., creating defensible space) that can reduce the likelihood of wildfire damage and decrease the likelihood of injury is a common approach to increasing wildfire safety and damage mitigation. This study was designed to improve our understanding of both individual and community actions that homeowners currently do or might take to protect their home or property, and the barriers that impede homeowners from completing firewise treatments to their home or property.
Publication Type: Report
Bark Beetles and Fire: Two forces of nature transforming western forests
Year: 2012
Publication Type: Report
Wildfire exposure to analysis on the national forests in the Pacific Northwest, USA
Year: 2012
We analyzed wildfire exposure for key social and ecological features on the national forests in Oregon and Washington. The forests contain numerous urban interfaces, old growth forests, recreational sites, and habitat for rare and endangered species. Many of these resources are threatened by wildfire, especially in the east Cascade Mountains fire-prone forests. The study illustrates the application of wildfire simulation for risk assessment where the major threat is from large and rare naturally ignited fires, versus many previous studies that have focused on risk driven by frequent and small…
Publication Type: Journal Article
Smoke Science Plan: The Path Forward
Year: 2012
Wildland fire managers face increasingly steep challenges to meet air quality standards while planning prescribed fire and its inevitable smoke emissions. The goals of sound fire management practices, including fuel load reduction through prescribed burning, are often challenged by the need to minimize smoke impacts on communities. Wildfires, of course, also produce smoke, so managers must constantly weigh the benefits and risks of controlled burns and their generated emissions against potential wildfires and their generated emissions and must communicate those benefits and risks to the…
Publication Type: Report
Ponderosa Pine Biomass Relationships Vary with Site Treatment and Site Productivity
Year: 2011
Allometric equations, which express biomass as a function of tree size, are often used to estimate the amount of fuel in a site’s canopy. Most managers assume that one allometric equation per species is sufficient, or that any error introduced by extrapolation is irrelevant. This work showed, however, that the allometric biomass relationship for ponderosa pine likely changes over space and time. The researchers concluded that for maximum accuracy, allometric equations for ponderosa pine should account for stand management history and site productivity. Thinned trees replaced their foliage…
Publication Type: Report
Woodpecker habitat after fire
Year: 2011
Public land managers are asked to minimize fuel levels after fi res, including using techniques such as salvage logging. They are also responsible for maintaining suitable wildlife habitat, especially for species of concern to state and federal agencies. An area where these responsibilities could conflict is in the use of salvage logging in burned-over areas that also represent good habitat for certain wildlife such as woodpeckers. Controversy over this conflict has led to litigation. Public land management agencies need consistent design criteria to maintain suitable habitats for these birds…
Publication Type: Report
Assessing Fuel Treatment Effectiveness After the Tripod Complex Fires
Year: 2011
Over the past 50 years, wildfire frequency and area burned have increased in the dry forests of western North America. To help reduce high surface fuel loads and potential wildfire severity, a variety of fuel treatments are applied. In spite of the common use of these management practices, there have been relatively few opportunities to quantitatively measure their efficacy in wildfires. That changed with the 2006 Tripod Complex fires in the Okanogan-Wenatchee National Forest in Washington—one of the largest fire events in Washington state over the past five decades. A serendipitous…
Publication Type: Report
Introducing FuelCalc: A New Tool that Helps Turn Static Inventory Data into Actionable Information
Year: 2010
Fuel and fire managers perform fuel treatments to manage and restore ecosystems and protect resources. In order to plan effective fuel treatments that accomplish objectives, managers need to analyze fuel conditions and document the expected fire behavior and fire effects both before and after fuel treatment. To help accomplish these goals, a new software tool named FuelCalc was created. FuelCalc facilitates use of a wide range of inventory data and fuel characteristics to help calculate fuel quantities and qualities to estimate potential fire behavior, fire effects, and smoke production. By…
Publication Type: Report
Masticating Fuels: Effects on Prescribed Fire Behavior and Subsequent Vegetation Effects
Year: 2009
In fire management, there is an ongoing quest to find cost-effective, ecologically sound, and risk-reducing approaches to restoring dry conifer forests. So far little is known about the effectiveness of using mastication equipment in conjunction with prescribed burning to help meet management and restoration goals. Richy Harrod is the Deputy Fire Management Officer at the Okanogan-Wenatchee National Forest in Wenatchee, Washington. He and his colleagues began to address this knowledge gap and found that mastication may be a cost-effective and important tool for managers looking for additional…
Publication Type: Report
Consume 3.0 -- A Software Tool for Computing Fuel Consumption
Year: 2009
Knowing when, where and how fire should be applied is critical for land managers planning to use fire prescriptively for land management goals, or allowing fires ignited naturally to burn. Myriad variables need to be taken into consideration to determine how fire will consume different fuels. Consume, version 3.0 is a user-friendly software that incorporates the Fuel Characteristic Classification System (FCCS) to predict fuel consumption, pollutant emissions, and heat release. A flexible tool, Consume 3.0 makes these calculations based on fuel loadings, fuel moisture and other environmental…
Publication Type: Report