Research Database
Displaying 181 - 200 of 208
Fuel Variability Following Wildfire in Forests with Mixed Severity Fire Regimes, Cascade Range, USA
Year: 2012
Fire severity influences post-burn structure and composition of a forest and the potential for a future fire to burn through the area. The effects of fire on forests with mixed severity fire regimes are difficult to predict and interpret because the quantity, structure, and composition of forest fuels vary considerably. This study examines the relationship between fire severity and post-burn fuel characteristics in forests with mixed severity fire regimes. We sampled live and dead canopy and…
Publication Type: Journal Article
Pattern and process of prescribed fires influence effectiveness at reducing wildfire severity in dry coniferous forests
Year: 2012
We examined the effects of three early season (spring) prescribed fires on burn severity patterns of summer wildfires that occurred 1–3 years post- treatment in a mixed conifer forest in central Idaho. Wildfire and prescribed fire burn severities were estimated as the difference in normalized burn ratio (dNBR) using Landsat imagery. We used GIS derived vegetation, topography, and treatment variables to generate models predicting the wildfire burn severity of 1286–5500 30- m pixels within and around treated areas. We found that wildfire severity was significantly lower in treated areas than in…
Publication Type: Journal Article
Mastication and Prescribed Fire Influences on Tree Mortality and Predicted Fire Behavior in Ponderosa Pine
Year: 2012
The purpose of this study was to provide land managers with information on potential wildfire behavior and tree mortality associated with mastication and masticated/fire treatments in a plantation. Additionally, the effect of pulling fuels away from tree boles before applying fire treatment was studied in relation to tree mortality. Fuel characteristics and tree mortality data were gathered before and after treatments in a 25-year-old ponderosa pine (Pinus ponderosa C. Lawson) plantation. A random block design was used with three treatments plus a control at each of four blocks. Four plots…
Publication Type: Journal Article
Fuel treatment impacts on estimated wildfire carbon loss from forests in Montana, Oregon, California, and Arizona
Year: 2012
Using forests to sequester carbon in response to anthropogenically induced climate change is being considered across the globe. A recent U.S. executive order mandated that all federal agencies account for sequestration and emissions of greenhouse gases, highlighting the importance of understanding how forest carbon stocks are influenced by wildfire. This paper reports the effects of the most common forest fuel reduction treatments on carbon pools composed of live and dead biomass as well as potential wildfire emissions from six different sites in four western U.S. states. Additionally, we…
Publication Type: Journal Article
Temporal dynamics and decay of coarse wood in early seral habitats of dry-mixed conifer forests in Oregon’s Eastern Cascades
Year: 2012
Early seral forest habitats are increasingly valued for the unique structural resources they provide in many western US forests. Coarse woody detritus (CWD) are a significant feature of this developmental stage and are highly dynamic, suggesting these environments exhibit temporally diverse structural conditions prior to forest canopy closure. In dry-mixed conifer forests, snags are hypothesized to decay slower than logs making long-term dynamics in these forests dependent on snag fall, breakage and the decay rates of both standing and surface CWD. We estimated snag fall and breakage rates…
Publication Type: Journal Article
Estimation of Wildfire Size and Risk Changes Due to Fuels Treatments
Year: 2012
Human land use practices, altered climates, and shifting forest and fire management policies have increased the frequency of large wildfires several-fold. Mitigation of potential fire behaviour and fire severity have increasingly been attempted through pre-fire alteration of wildland fuels using mechanical treatments and prescribed fires. Despite annual treatment of more than a million hectares of land, quantitative assessments of the effectiveness of existing fuel at reducing the size of actual wildfires or how they might alter the risk of burning across landscapes are currently lacking.…
Publication Type: Journal Article
Fuel Treatment Effectiveness in California Yellow Pine and Mixed Conifer Forests
Year: 2012
We assessed the effectiveness of forest fuel thinning projects that explicitly removed surface and ladder fuels (all but one were combined mechanical and prescribed fire/pile burn prescriptions) in reducing fire severity and tree mortality in 12 forest fires that burned in eastern and southern California between 2005 and 2011. All treatments and fires occurred in yellow pine or mixed conifer forests, in a variety of landscape conditions. Most fires burned under warm, dry conditions, with moderate to high winds. With few exceptions, fire severity measures (bole char height, scorch and torch…
Publication Type: Journal Article
Meta-analysis of avian and small-mammal response to fire severity and fire surrogate treatments in US fire-prone forests
Year: 2012
Management in fire-prone ecosystems relies widely upon application of prescribed fire and/or fire surrogate (e.g., forest thinning) treatments to maintain biodiversity and ecosystem function. Recently, published literature examining wildlife response to fire and fire management has increased rapidly. However, none of this literature has been synthesized quantitatively, precluding assessment of consistent patterns of wildlife response among treatment types. Using meta-analysis, we examined the scientific literature on vertebrate demographic responses to burn severity (low/moderate, high), fire…
Publication Type: Journal Article
Estimating Consumption and Remaining Carbon in Burned Slash Piles
Year: 2012
Fuel reduction treatments to reduce fire risk have become commonplace in the fire adapted forests of western North America. These treatments generate significant woody debris, or slash, and burning this material in piles is a common and inexpensive approach to reducing fuel loads. Although slash pile burning is a common practice, there is little information on consumption or even a common methodology for estimating consumption. As considerations of carbon storage and emissions from forests increase, better means of quantifying burn piles are necessary. This study uses two methods, sector…
Publication Type: Journal Article
The Effects of Forest Fuel-Reduction Treatments in the United States
Year: 2012
The current conditions of many seasonally dry forests in the western and southern United States, especially those that once experienced low- to moderate-intensity fire regimes, leave them uncharacteristically susceptible to high-severity wildfire. Both prescribed fire and its mechanical surrogates are generally successful in meeting short-term fuel-reduction objectives such that treated stands are more resilient to high-intensity wildfire. Most available evidence suggests that these objectives are typically accomplished with few unintended consequences, since most ecosystem components (…
Publication Type: Journal Article
A Comprehensive Guide to Fuel Management Practices for Dry Mixed Conifer Forests in the Northwestern United States
Year: 2012
This guide describes the benefits, opportunities, and trade-offs concerning fuel treatments in the dry mixed conifer forests of northern California and the Klamath Mountains, Pacific Northwest Interior, northern and central Rocky Mountains, and Utah. Multiple interacting disturbances and diverse physical settings have created a forest mosaic with historically low- to mixed-severity fire regimes. Analysis of forest inventory data found nearly 80 percent of these forests rate hazardous by at least one measure and 20 to 30 percent rate hazardous by multiple measures. Modeled mechanical…
Publication Type: Report
Short- and Long-term Effects of Fire on Carbon in US Dry Temperate Forest Systems
Year: 2011
Forests sequester carbon from the atmosphere, and in so doing can mitigate the effects of climate change. Fire is a natural disturbance process in many forest systems that releases carbon back to the atmosphere. In dry temperate forests, fires historically burned with greater frequency and lower severity than they do today. Frequent fires consumed fuels on the forest floor and maintained open stand structures. Fire suppression has resulted in increased understory fuel loads and tree density; a change in structure that has caused a shift from low- to high-severity fires. More severe fires,…
Publication Type: Journal Article
Assessing Fuel Treatment Effectiveness After the Tripod Complex Fires
Year: 2011
Over the past 50 years, wildfire frequency and area burned have increased in the dry forests of western North America. To help reduce high surface fuel loads and potential wildfire severity, a variety of fuel treatments are applied. In spite of the common use of these management practices, there have been relatively few opportunities to quantitatively measure their efficacy in wildfires. That changed with the 2006 Tripod Complex fires in the Okanogan-Wenatchee National Forest in Washington—one of the largest fire events in Washington state over the past five decades. A serendipitous…
Publication Type: Report
Both topography and climate affected forest and woodland burn severity in two regions of the western US, 1984 to 2006
Year: 2011
Fire is a keystone process in many ecosystems of western North America. Severe fires kill and consume large amounts of above- and belowground biomass and affect soils, resulting in long-lasting consequences for vegetation, aquatic ecosystem productivity and diversity, and other ecosystem properties. We analyzed the occurrence of, and trends in, satellite-derived burn severity across six ecoregions in the Southwest and Northwest regions of the United States from 1984 to 2006 using data from the Monitoring Trends in Burn Severity project. Using 1,024 fires from the Northwest (4,311,871 ha) and…
Publication Type: Journal Article
Reducing hazardous fuels on nonindustrial private forests: factors influencing landowner decisions
Year: 2011
In mixed-ownership landscapes, fuels conditions on private lands have implications for fire risk on public lands and vice versa. The success of efforts to mitigate fire risk depends on the extent, efficacy, and coordination of treatments on nearby ownerships. Understanding factors in forest owners’ decisions to address the risk of wildland fire is therefore important. This research uses logistic regression to analyze mail survey data and identify factors in forest owners’ decisions to reduce hazardous fuels in the ponderosa pine (Pinus ponderosa) ecosystem on the east side of Oregon. Results…
Publication Type: Journal Article
Ponderosa Pine Biomass Relationships Vary with Site Treatment and Site Productivity
Year: 2011
Allometric equations, which express biomass as a function of tree size, are often used to estimate the amount of fuel in a site’s canopy. Most managers assume that one allometric equation per species is sufficient, or that any error introduced by extrapolation is irrelevant. This work showed, however, that the allometric biomass relationship for ponderosa pine likely changes over space and time. The researchers concluded that for maximum accuracy, allometric equations for ponderosa pine should account for stand management history and site productivity. Thinned trees replaced their foliage…
Publication Type: Report
Evaluating Soil Risks Associated With Severe Wildfire and Ground-Based Logging
Year: 2011
Rehabilitation and timber-salvage activities after wildfire require rapid planning and rational decisions. Identifying areas with high risk for erosion and soil productivity losses is important. Moreover, allocation of corrective and mitigative efforts must be rational and prioritized. Our logic-based analysis of forested soil polygons on the Okanogan-Wenatchee National Forest was designed and implemented with the Ecosystem Management Decision Support (EMDS) system to evaluate risks to soil properties and productivity associated with moderate to severe wildfire and unmitigated use of ground-…
Publication Type: Report
Simulating fuel treatment effects in dry forests of the western United States: testing the principles of a fire-safe forest
Year: 2011
We used the Fire and Fuels Extension to the Forest Vegetation Simulator (FFE-FVS) to simulate fuel treatment effects on 45 1 62 stands in low- to midelevation dry forests (e.g., ponderosa pine (Pinus ponderosa Doug!. ex. P. & C. Laws.) and Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) of the western United States. We evaluated treatment effects on predicted post-treatment fire behavior (fire type) and fire hazard (torching index). FFE-FVS predicts that thinning and surface fuel treatments reduced crown fire behavior relative to no treatment; a large proportion of stands were…
Publication Type: Journal Article
The fire pulse: wildfire stimulates flux of aquatic prey to terrestrial habitats driving increase in riparian consumers
Year: 2010
We investigated the midterm effects of wildfire (in this case, five years after the fire) of varying severity on periphyton, benthic invertebrates, emerging adult aquatic insects, spiders, and bats by comparing unburned sites with those exposed to low severity (riparian vegetation burned but canopy intact) and high severity (canopy completely removed) wildfire. We observed no difference in periphyton chlorophyll a or ash-free dry mass among different burn categories but did observe significantly greater biomass of benthic invertebrates in both high severity burned and unburned reaches versus…
Publication Type: Journal Article
Consume 3.0 -- A Software Tool for Computing Fuel Consumption
Year: 2009
Knowing when, where and how fire should be applied is critical for land managers planning to use fire prescriptively for land management goals, or allowing fires ignited naturally to burn. Myriad variables need to be taken into consideration to determine how fire will consume different fuels. Consume, version 3.0 is a user-friendly software that incorporates the Fuel Characteristic Classification System (FCCS) to predict fuel consumption, pollutant emissions, and heat release. A flexible tool, Consume 3.0 makes these calculations based on fuel loadings, fuel moisture and other environmental…
Publication Type: Report